Product ID:POLY (UNDECANOAMIDE), 006
MSDS Date:07/01/1993
FSC:9330
NIIN:00N043703
MSDS Number: BTGWB

SCIENTIFIC POLYMER PRODUCTS INC

6265 DEAN PARKWAY
ONTARIO, NY 14519
US

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MWG0

SCIENTIFIC POLYMER PRODUCTS INC

ONTARIO, NY 14519 US

Telephone: 716-265-0413

Cage: 0MWG0

NYLON 11

CAS: 25587-80-8

Fraction By Weight: >99%

OSHA PEL N/K

ACGIH TLV: N/K

ADDITIVES

Fraction By Weight: < 1%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MEDICAL
ASSISTANCE. INHAL: REMOVE FROM EXPOSURE. IF BREATHING STOPS, BEGIN
MOUTH TO MOUTH. EYES: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN:
WASH AFFECTED AR EA WITH SOAP AND WATER. REMOVE DIRTY CLOTHING.
INGEST: CALL MD IMMEDIATELY .

Extinguishing Media:WATER SPRAY, CO2, FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DUST GENERATED DURING HNDLG & STORAGE CAN
CREATE EXPLOSIVE MIXTURES IN AIR. DURING A FIRE, IRRITATING &/OR
TOXIC GASES DUE TO DECOMPOSITION MAY BE GENERATED.

Spill Release Procedures:SWEEP "INERT" ORGANIC PELLETS, AND DISPOSE OF
PROPERLY. AVOID GENERATION OF DUST IN THE AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP DRY AND AWAY FROM ACIDS AND
STRONG OXIDIZING AGENTS.
Other Precautions:NOTE: MATERIAL IS INTENDED FOR LABORATORY USE ONLY.
IT IS NOT SOLD OR INTENDED FOR DRUG, HOUSEHOLD OR OTHER USES.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APVD CHEMICAL SAFETY GOGGLES
Other Protective Equipment:ANSI APVD EYEBATH AND SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:370F,188C
Spec Gravity:1.03
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TRANSLUCENT PELLETS

Stability Indicator/Materials to Avoid:YES
ACIDS AND STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEATING ABOVE 340C.
Hazardous Decomposition Products:OXIDES OF CARBON AND NITROGEN.

Waste Disposal Methods:IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.